Important Considerations for Exterior Wrought Iron Sconces

Selecting wrought iron sconces for exterior use can be complex. Besides style selection, the item’s finish should be carefully considered think about any wrought straightener product for exterior use. The appropriate finish selection of your wrought iron products will ensure their extended life and help maximize your investment. This article will discuss finish options to keep in mind when selecting a wrought straightener lighting fixture or other product for exterior use. custom chandeliers

Keep in mind that all iron products will rust if not properly protected. Iron sconces and other items made of the same material are subject to oxidation. Corrosion is the outcome of said oxidation and can only be abated with proper finishes and maintenance techniques. 

The finish on your sconces or other iron products is of utmost importance when your items will be situated in the outdoors. The most commonly used finish is the powder coat coloring process. This finish has been touted over time as being the strudiest and many items are over with such a process. When properly applied powder snow coats give a very durable finish but there are some disadvantages to using such a process. First of all, most powder coats are not paint but alternatively a nylon or fabric-made coating that has a tendency to leave a “plastic” feeling over the treated item. Beyond the plastic look and feel of powder coat, the application is quite solid. For these two reasons the powder coating process can be detrimental to ornamental wrought iron products. Wrought iron goods which may have been hand made by true artisans generally have sensitive scroll work and other distress patterns which can be meant to have an “old world” look and feel. When this artisan work is covered with a powder coat a lot of that look is included in the thickly applied powder coating process. The natural blemishes of the metal are also gone, since most powder coats processes have a tendency to commence with a comprehensive sandblasting.

What alternatives can be obtained? Well, there are numerous finishes that will protect your metal and leave a more natural “old world” finish and never water down the artistic work with the wrought iron. An sufficiently painted wrought iron permanent fixture will last for years if properly maintained. Very much like your car’s coloring finish any iron small sconce or other iron product can be treated routinely with wax to ensure longevity. This maintenance process is even easier today since there are lots of spray waxes and maintenance systems offering protection and convenience. Accurate artisans and blacksmiths usually tend to choose this finish off method for exterior use since it does not compromise the workmanship of the final product.

The moment iron products are put in especially harsh conditions additional care can be studied by applying a proper undercoat to a coloring finish. Two examples of such undercoats are zinc chromate primers and zinc/aluminum flame sprays. These undercoats are especially recommended when wrought iron will be nearby the ocean or in high humidity areas. The usage of these undercoats is designed to safeguard the metal from corrosion. Once a last paint is chosen however, the paint finish itself should be protected with wax or any other protective coating.

In conclusion, the purpose of this article is not necessarily intended to dissuade anyone from using the commonly used powder snow coat paint process in their wrought iron lamps or other iron products that will sit outside. Rather you should shed some light on a few of the other lesser known methods of treating and protecting made iron products. While these methods do tend to cost somewhat more, they give a more natural feel to ornamental iron products.